Access control

The latest generation of our access control wall reader for easy surface mounting over a DIN switch box. In addition to Mifare-DESfire and LEGIC-Advant cards, he also reads ATS mobile phone IDs with an adjustable range of 0-1m or 0-3m.
With two 3mm screws and a Phoenix spring-loaded pin header connector, the reader can be installed quickly and easily over a switch box. A sabotage contact protects the reader from unauthorized manipulation. A buzzer and a large 3-color LED in the colors red, green and blue, signals access authorization or writing to the card memory with blue.
All of this with the security you are used to from ATS through authentication and AES encryption. The reader has a IBB/S AES128 safety bus interface for data transmission and power supply; Two monitored inputs and a "Coded Relay" interface for safe door control. A card writing function enables card data update for offline locks.

Technical data:

• RFID write / read function for DESFire & LEGIC Advant
• BLE reader for encrypted ATS Mobile-ID or BLE key fobs
• RFID reading range of up to 5cm, Mobile ID 0-3m or 0-6m
• Three colour LED for access & write function
• Addressable (1-120) RS485 IBB/S bus interface (CAT5 cable)
• 2 monitored inputs for door monitoring, handle contact, etc
• Sabotage sensor for signalling unauthorized manipulation
• Coded Relay" interface for safe door control
• Power supply: via bus 12-25VDC max.90mA
• Temperature range: -10 ° to + 50 ° C
• Dimensions: W82 x H82 x D12 mm

Three functions in one device enable a significant reduction in installation work. The glass design access reader with touch light switch function, integrated room temperature and humidity sensor, meets all requirements for modern building technology. Thanks to the easy-to-clean glass surface, the reader looks like new even after many years. In addition to Mifare-DESfire and LEGIC-Advant cards, it also reads ATS mobile phone IDs with an adjustable range of 0-1m or 0-3m. With the new ATS-Click assembly, installation in a DIN light switch box is done in a few simple steps. A chrome frame enables a gap-free and elegant wall connection. Three three-color LEDs signal the access authorization with red / green and writing to the card memory with blue. A buzzer signals an door is open too long or the confirmation of access authorization.
All of this with the security you are used to from ATS through authentication and AES encryption. The reader has an IBB / S AES128 safety bus interface for data transmission and power supply; Two monitored inputs and a "Coded Relay" interface for safe door control. A card writing function enables card data update for offline locks.

Technical data:

• RFID write / read function for DESFire & LEGIC Advant
• BLE reader for encrypted ATS Mobile-ID or BLE key fobs
• RFID reading range of up to 5cm, Mobile ID 0-3m or 0-6m
• Three colour LED for access & write function
• Touch light switch, sensor for room temperature & humidity
• Addressable (1-120) RS485 IBB/S bus interface (CAT5 cable)
• 2 monitored inputs for door monitoring, handle contact, etc
• Sabotage sensor for signalling unauthorized manipulation
• Coded Relay" interface for safe door control
• Power supply: via bus 12-25VDC max.90mA
• Temperature range: -10° to + 50° C
• Dimensions: W82 x H82 x D9mm (above surface)

An only 45mm wide 125kHz access control reader enables simple surface-mount, as well as mounting the reader on very narrow door frames. It reads 125kHZ 3DES encrypted ATS DIGid cards (DIGIlock-UX only unencrypted) with a reading distance of up to 5cm (DIGIid key fob with up to 3cm) It consists of a lower part with the cabling clamp, an attachable upper part and a security screw for locking . A green LED arrow and an LED bar in red or orange indicate access authorization. A buzzer signals an door is open to long or configurable also for access authorization. The reader has an IBB bus interface for data transmission and power supply, two digital inputs and a "Coded Relay" interface for safe door control.

Technical data:

• 125kHz RFID reader for 3DES encrypted DIGIid cards
• DIGIlock-UX for unencrypted cards
• RFID reading range of up to 6cm
• Two two-color LED bars and a buzzer for signaling permitted or not permitted access
• 2 digital inputs for door monitoring, handle contact, etc.
• "Coded Relay" interface for safe door control
• Addressable (1-120) RS485 IBB bus interface (CAT5 cable)
• Power supply: via bus 12-25VDC max.90mA
• Temperature range: -10° to + 50° C
• Dimensions: W45 x H160 x D21 mm

is an advanced encrypted Legic reader with authentification / encryption of data cards and finger print user verification. The finger templates are stored only on the card to ensure the highest possible privacy of the biometric data’s. The outstanding design features in wall mounting kit with a glass front reader and a 45 degree inclined fingerprint sensor. A multispectral fingerprint imaging technology captures superior images quickly, on all people, in all environmental conditions. Simply stated, the sensors work where other technologies fail. Multispectral imaging can quickly detect a fake by characterizing the subsurface data against the known characteristics of the human skin.
The designer glass front part is prepared for assembly in a tin box; Reading range up to 5cm; 128Bit AES encryption, four two-color LEDs and a buzzer signal allowed access, rejected attempts or the door is open too long; 2x digital inputs for door monitoring, IR detectors, opener buttons etc .; Sabotage contact; Interface for an encrypted coded relay with authentication; 15,000 cards emergency access parameter memory for the offline state; Addressable (1-120) RS485 bus interface; DC / DC converter for the power supply via the CAT-5 bus cable.

Technical Data:

• RFID read function for DESFire & LEGIC Advant
• up to 5cm reading range
• High secure multispectral finger print sensor
• 4 two-color LEDs & integrated buzzer
• 1 Optical Fingerprint Scanner & Verification Unit
• 1 tamper contact
• 1 RS485 multi drop Intelligent Building Bus (IBB) interface
• "Coded Relay" interface for safe door control
• 2 digital inputs
• Power supply: 12-25VDC / 100 mA
• Temperature range: -10 ° to + 50 ° C
• Dimensions: W82 x H175 x D42 mm (above the DIN socket)

Coded relay module for controlling door locks with encrypted communication and authentication with ATS access control readers. It contains a toggle relay output for controlling door locks, two monitored inputs for door monitoring, latch contact, alarm inputs, etc. An additional input is used for reader authentication during installation and thus reliably prevents the possibility of later manipulation to open the door from the outside.

Technical data:

• CMOS microprocessor with encrypted reader communication
• 1x Relay 30V 1A
• 2x monitored alarm inputs
• 1x Authentication input
• 2x Diagnostic-LED's
• Power supply: 10,5-24VDC / 80 mA (from reader)
• Dimension: Ø60 x H21mm

DIGIcontrol-PR+ is a powerful extension for all ATS next generation Systems with extended need of distributed uninterruptible power supply and control for doors and rooms. The wide input voltage range switched power supply for 100 - 240VAC ensures stable operation under all thinkable conditions. Featuring two CPU controlled switched power circuits enables the unit to regulate charging and supply voltage individually. This ensures also in case of power fail, when running on battery, a stable output voltage of 13,5VDC without any voltage drop.
An extra connector for the access reader includes beside the IBB, a coded relay interface for lock control.
Two potential free relays could be used either for turnstile control, for a second and third door lock or for lighting control. An Opto-IN and IN4 of the four monitored could be used to bypass CPU to un-power Relay 1 in case of fire or emergency.

Technical data:

• AT89C51 CMOS microprocessor with 64kB Flash
• 4x Dual-LEDs for device and battery status
• 4x balanced alarm inputs, 1x Tamper contact
• 2x 13,5V 1,2A power supply for ext. devices & lock
• 1x Solid-state relay for lock control 13,5V/0,5Amax
• 2x Potential free relays 230VAC/10A
• 1x Battery temperature sensor
• 1x RS485 Intelligent Building Bus (IBB) interface
• 1x Opto-IN 24V for emergency release of Relay 1
• Temperature range: -10° to +50°C
• Power supply: 60VA 100-240VAC / 12V
• Dimensions: W200 x H220 x D70mm
• Temperature range: -10° to +45°C