Fire & Intrusion

TCP/IP Ethernet is the new standard for security and building control systems. DIGIcontrol-BC3002 full redundant fire alarm controller is a new step for ATS integrated building control systems.

• The intelligent Fire Alarm Control Panel, designed with one to 8 Loop controllers for medium- to large-scale facilities. Each loop controller handles up to 125 addressable Apollo XP95 or Discovery fire detectors.
• Fire emergency detection and evacuation are extremely critical to life safety, and the BC3000 is ideally suited for these needs. A large 320-character LCD-Display and keypad presents vital information to operators concerning a fire situation, progression of fire and evacuation details.
• An intelligent 7A/24V power supply ensures together with a maximum of 2 x 85Ah batteries and the configuration software 72h operation in case of power fail.
• Build in Alarm, trouble, security and supervisory relays
• Software and parameters stored in Flash memory
• Occupancy time schedules allow changing of sensitivity and alarm rules
• Optional 2x96 free configurable LED panel for fire groups and system or output status
• 3000 event history file in non-volatile memory
• Auto programming and walk test report
• Up to nine users, each with a password and selectable access levels
• 17 & 2x16 LED indicators: Power;  Fire Alarm; Delayed Alarm; System Trouble; …

technical data

• Dual ARM9200 32Bit MCU with automatic fail over
• Up to 8 Single or full redundant loop interfaces
• Dual-detector algorithm involves nearby detector in alarm decision
• Optional redundant 8 zone fire distinguisher interface
• Optional integrated SMS and Modem interface
•   The integrated IP monitoring interface permit monitoring of alarm signals over the Internet. A built in high performance 256bit AES communication encryption makes it to the securest fire controller worldwide. Auto configuration data’s are loaded to the free configuration Software to allow a fast and easy configuration.
• An optional DIGIcontrol-3000BG is a powerful graphic editor for custom graphics and central monitoring Software. Alternative DIGIcontrol-3000BI gives all the feature of DIGIcontrol-3000BG plus full integration with the DIGIcontrol-3000 building and security system.
• Information from the fire panel can be sent via an ATS communications link directly to the FC3000 multi-application controllers. This gives a perfect integration with the ATS security and building automation system.
• Fully redundant EN54 & VdS certified Firepanel
• redundant double CPu central unit
• Bus driven supporting Apollo XP95 and Discovery protocoll
• Redundant peripjherials
• up to 1000  sensors (bus or conventional)
• up to 4 Fire brigade panels
• up to 8 distinguischer areas
• optional alarm SMS
• configuration software

The Discovery CO fire detector is excelent at detecting deep-seated fires. Please be aware CO detectors do not detect smoke particles and the do not detect heat. They are not replacements for smoke detectors.

Discovery is a range of high-specification, intellligent fire detectors developed to meet the requirements of sophisticated systems while providing engineers with additional dimension in fire protection capability. Discovery gives you total reassurance in installation where adaptability to changing conditions and protection against unwanted alarms are paramount.

DIGIcontrol-FAL IBB fire loop controller is a generic fire detector loop gateway to expand ATS floorcontrollers with technical fire alarm sensors. It enables to connect up to 60 XP95 or Discovery Apollo fire detectors on a single fire loop.

Technical data:

• 89C51 CMOS CPU, 64kB Flash/32kB SRAM 
• 1 Fire loop interface for up to 60 XP95 or Discovery fire detectors
     with configurable max. loop current
• 1 Configurable alarm relay (NO or NC jumper)
• 3 Dual colour LED’S for CPU, DIAG & ALARM
• IBB 56kB RS485 bus interface to floor controller
• Supply with 15-24VDC /1A from Bus or external source
• Temperature range: -10° to +50°C
• Dimensions: 114 x 114 x H 26 mm

Universal SMS gateway for secure SMS communication with DIGIcontrol-3000.
Data base with 80 ID’s with phone number, PIN and authorization profile to
allow automatic system notifications, alarm messages and commands.
20 key words for simple control of light, alarm, access control and  HVAC.

Technical data:

• 32-bit ARM Cortex-M4 CPU, 512kB Flash/64kB SRAM 
• Micro SIM Card Connector
• SMA-Antenna socket 
• 1 x Interface for Sensirion digital humidity & temperature sensor
• 3 x supervised digital inputs, 3 x Relay 60V/6A
• internal service input for bus voltage
• IBB/S 56kB RS485 Businterface to the Floorcontroller
• Supply voltage: 12-28VDC/0,2A from Bus or extern
• Temperaturbereich: -10° to +50°C m
• Maße: 114 x 114 x H 26 mm