Central Units

  • Floorcontroller general

    There is a large variety of ATS building & security IP-controllers for a perfect match of your demands. All controllers support the same base functionality which includes all disciplines of a modern building including security in in each controller, but supports different amount of rooms, access control card members and power fail functionality.
    All controllers come with free graphical control software for displaying state and operating off all different security and building automation functions. Messages and system states are displayed clearly at a PC workstation. Several Software options allow expanding the system to many sites and various special functions. The ATS IP-Floorcontrollers allow a maximum on flexibility to configure small to very large sites. The ATS Systems fulfil all necessary functionality and demands described in the solution sector.  256Bit AES encryption for the entire IP-Network gives a maximum of security to connect sites of many locations even over the public internet. Following functions supported by all ATS Floorcontrollers types:

    • Ethernet TCP/IP network interface
    • Intelligent Building Bus (IBB)   500m CAT-5 cable for a maximum of 120 devices
    • Integrated wide range switched power supply
    • Access control application for up to 15000 cards
    • Light control function with 10.000 light circuits system wide
    • HVAC control with regulation, logic and math. functions
    • Intrusion alarm system
    • Technical fire alarm system
    • Video, Intercom & SOIP control
  • AIDApoint™-AC100/FID

    AIDApoint-AC100
    Brochure:

    3rd generation high security room controller; Easiest installation thanks to POE Ethernet power supply for controller, lock and up to 6 bus devices; Optional face recognition interface to extend the access control function with biometric verification with face ID camera; High performance CPU with 512MB DDR3L SDRAM & 4GB eMMC Memory for 30.000 cards access control.

    • 5000 Personnel groups
    • 5 out of 2.000 access areas and 30.000 cards
    • 20 time structures for access, door-functions & Light
    • 10 out of 10.000 light circuits & 10 light programmes
    • 5 out of  2000 alarm areas in one of  2000 groups
    • 10 regulation modules
    • Direct Interaction with ATS - video recorder

    Technical Data:

    • 32 Bit 1,4 GHz Dual-Cortex-53 based i.MX8m Nano CMOS clock
    • 10/100Mbit 10W POE Ethernet Interface
    • 2 Potential free Relays 230VAC/60VDC/6A
    • 2 monitored Inputs
    • 1x IBB/S with electronic fuse  0,5A 12VDC
    • Tamper secured on wall housing 114 x 114 x H 26 mm
  • AIDApoint™-AD100

    AIDApoint-AD100
    Brochure:

    3rd generation high security room controller; Easiest installation thanks external power supply for controller, lock and up to 6 bus devices; Optional face recognition interface to extend the access control function with biometric verification with face ID camera; High performance CPU with 512MB DDR3L SDRAM & 4GB eMMC Memory for 30.000 cards access control.

    • 5000 Personnel groups
    • Up to 5 out of 2.000 access areas and 30.000 cards
    • 20 time structures for access, door-functions & Light
    • Up to 10 out of 10.000 light circuits & 10 light programmes
    • Up to 5 out of  2000 alarm areas in one of  2000 groups
    • 10 regulation modules
    • Direct Interaction with ATS - video recorder

    Technical Data:  

    • 32 Bit 1,4 GHz Dual-Cortex-A53 based i.MX8m Nano CMOS clock
    • 10/100Mbit Ethernet Interface
    • External power connector 23-28VDC/1A
    • 2 Potential free Relays 60VAC/DC   6A
    • 2 monitored Inputs
    • 1x IBB/S with electronic fuse  0,5A 24VDC
    • Tamper secured on wall housing 114 x 114 x H 26 mm
  • DIGIcontrol-FC3100

    DIGIcontrol-FC3100
    Brochure:

    Security & building automation controller for up to 120 bus devices,

    • 50 security and regulation areas with battery management.
    • Alarm central function for up to 50 out of 2000 total system wide arming areas ;
    • Access control for up to 15.000 cards and 50 doors;
    • 50 Regulation circuits for temperature control;
    • light control for up to 200 light circuits, outside light level depending dimming and colour temperature control;
    • 50 light programs;
    • Management for up to 8 door entry phones and 8 intelligent 2-wire analogue cameras.
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technical data:

    • 32 Bit 180Mhz ARM-9 CPU with Lithium battery buffered CMOS clock;
    • 32MB SDRAM, 16MB Flash memory,
    • 10/100Mbit Ethernet interface,
    • 1x 56kB serial communication with bus multiplexor to 4x RS485 IBB lines (configurable also as 2 IBB-Loops) each with electronic fuses 0,5A 24VDC and line power monitoring
    • 1x RS232 for diagnostic
    • 5x supervised alarm inputs
    • 1x tamper switch,
    • 3x Relay out max 30V/0.2A
    • 3x monitored siren output
    • Power supply: 110-250VAC  60 VA
          DC Output: 24V DC  2,5A max
    • Battery charging and managing logic       
    • AC and Battery Power monitoring
    • Dimensions (overall): 307 x 175 x 80mm
    • Temperature range: -10° to +45°C
  • DIGIcontrol-FC3101

    DIGIcontrol-FC3100
    Brochure:

    Security & building automation controller for up to 60 bus devices,

    • 20 security and regulation areas with battery management.
    • Alarm central function for up to 20 out of 2000 total system wide arming areas ;
    • Access control for up to 15.000 cards and 20 doors;
    • 20 Regulation circuits for temperature control;
    • light control for up to 200 light circuits, outside light level depending dimming and colour temperature control;
    • 50 light programs;
    • Management for up to 8 door entry phones and 8 intelligent 2-wire analogue cameras.
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technical data:

    • 32 Bit 180Mhz ARM-9 CPU with Lithium battery buffered CMOS clock;
    • 32MB SDRAM, 16MB Flash memory,
    • 10/100Mbit Ethernet interface,
    • 1x 56kB serial communication with bus multiplexor to 4x RS485 IBB lines (configurable also as 2 IBB-Loops) each with electronic fuses 0,5A 24VDC and line power monitoring
    • 1x RS232 for diagnostic
    • 5x supervised alarm inputs
    • 1x tamper switch,
    • 3x Relay out max 30V/0.2A
    • 3x monitored siren out
    • Power supply: 110-250VAC  60 VA
          DC Output: 24V DC  2,5A max
    • Battery charging and managing logic     
    • AC and Battery Power monitoring
    • Dimensions (overall): 307 x 175 x 80mm
    • Temperature range: -10° to +45°C
  • DIGIcontrol-FC3300

    DIGIcontrol-FC330x
    Brochure:

    Security & building automation controller for up to 120 bus devices and 50 security and regulation areas.

    • Alarm central function for up to 50 out of 2000 total system wide arming areas
    • Access control for up to 15.000 cards and 50 doors
    • 50 Regulation circuits for temperature control
    • light control for up to 200 light circuits, outside light level depending dimming and colour temperature control
    • 50 light programs
    • Management for up to 8 door entry phones and 8 intelligent 2-wire analogue cameras.
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technical data:

    • 32 Bit 400MHz i.MX27 ARM-9 CPU with CMOS-Uhr & Lithiumbattery;
    • 64MB SDRAM und 64MB Flash memory
    • 10/100Mbit Ethernet interface
    • 1x 56kB serial interface with Bus multiplexor to 4x RS485 IBB lines,each with electronic fuses 0,5A/24VDC and line power monitoring
    • 1x RS232 for diagnostic
    • 1x supervised alarm input
    • 1x tamper switch,
    • 1x Relay out max 30V/0.2A
    • Power supply: 110-250VAC  60 VA 
          DC Output: 24V DC  2,5A max
    • Dimensions (overall): 307 x 175 x 80mm 307 x 175 x 80 mm
    • Temperature range: -10° to +45°C
  • DIGIcontrol-FC3301

    DIGIcontrol-FC330x
    Brochure:

    Security & building automation controller for up to 60 bus devices and 20 security and regulation areas.

    • Alarm central function for up to 20 out of 2000 total system wide arming areas
    • Access control for up to 15.000 cards and 20 doors
    • 20 Regulation circuits for temperature control
    • light control for up to 200 light circuits, outside light level depending dimming and colour temperature control
    • 50 light programs
    • Management for up to 8 door entry phones and 8 intelligent 2-wire analogue cameras.
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technical data:

    • 32 Bit 400MHz i.MX27 ARM-9 CPU with CMOS-Uhr & Lithiumbattery;
    • 64MB SDRAM und 64MB Flash memory
    • 10/100Mbit Ethernet interface
    • 1x 56kB serial interface with Bus multiplexor to 4x RS485 IBB lines,each with electronic fuses 0,5A/24VDC and line power monitoring
    • 1x RS232 for diagnostic
    • 1x supervised alarm input
    • 1x tamper switch,
    • 1x Relay out max 30V/0.2A
    • Power supply: 110-250VAC  60 VA 
          DC Output: 24V DC  2,5A max
    • Dimensions (overall): 307 x 175 x 80mm 307 x 175 x 80 mm
    • Temperature range: -10° to +45°C
  • DIGIcontrol-FC3252

    FC3100
    Brochure:

    2 door security & building automation controller for up to 10 bus devices and 2 (expandable to 5) security and regulation areas with battery management

    • Alarm central function for up to 2(5) out of 2000 total system wide arming areas
    • Access control for up to 15.000 cards and 2(5) doors;
    • 2(5) Regulation circuits for temperature control
    • light control for up to 6(15) light circuits, outside light level depending dimming and colour temperature control
    • 10 light programs;
    • Management for up to 2 door entry phones.
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technical data:

    • 32 Bit 400MHz i.MX27 ARM-9 CPU witht CMOS-Uhr & Lithiumbattery
    • 64MB SDRAM und 64MB Flash memory
    • 10/100Mbit Ethernet interface
    • 1x 56kB RS485 IBB lines with electronic fusea 1A/24VDC and line power monitoring
    • 1x 1A/24VDC electronically fused power out for sensors
    • 1x RS232 for diagnostic
    • 4x supervised alarm inputs
    • 1x opto in loop for fire door release
    • 2x Relay out max 30V/0.2A
    • Power supply: 110-250VAC  60 VA
          DC Output: 24V DC  2,5A max
          Battery charging and managing logic
          AC and battery power monitoring
    • Dimensions (overall):307 x 175 x 80 mm
    • Temperature range: -10° to +45°

    Option DIGIcontrol-FC1

    • Licence key option to expand DIGIcontrol-FC32x2 with one additional door. A maximum of 3 options per FC32x2 allows expansion for a total of 5 in and 5 exit readers. This option can be activated in field.
  • DIGIcontrol-FC3400

    DIGIcontrol-FC3400
    Brochure:

    60.000 cards security & building automation controller for up to 120 bus devices, 32 security and regulation areas with battery management.

    • Alarm central function for up to 32 out of 2000 total system wide arming areas
    • Access control for up to 60.000 cards and 32 doors;
    • 32 Regulation circuits for temperature control
    • light control for up to 200 light circuits, outside light level depending dimming and colour temperature control
    • 32 light programs
    • Management for up to 8 door entry phones and 8 intelligent 2-wire analogue cameras.
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technical Data:

    • 32 Bit 400MHz i.MX27 ARM-9 CPU mit CMOS-Uhr & Lithiumbattery
    • 128MB SDRAM und 128MB Flash memory
    • 10/100Mbit Ethernet interface
    • 1x 56kB serial communication with bus multiplexor
          to 4x RS485 IBB lines each with electronic fuses
          0,5A 24VDC and line power monitoring
    • 1x supervised alarm input
    • 1x tamper switch,
    • Power supply: 110-250VAC  60 VA
          DC Output: 24V DC  2,5A max
          Battery charging and managing logic
          AC and Battery Power monitoring
    • Dimensions (overall): 307 x 175 x 80mm
    • Temperature range: -10° to +45°C
  • DIGIcontrol-FC3401

    DIGIcontrol-FC3400
    Brochure:

    60.000 cards security & building automation controller for up to 60 bus devices, 20 security and regulation areas with battery management.

    • Alarm central function for up to 20 out of 2000 total system wide arming areas
    • Access control for up to 60.000 cards and 20 doors;
    • 20 Regulation circuits for temperature control
    • light control for up to 200 light circuits, outside light level depending dimming and colour temperature control
    • 50 light programs
    • Management for up to 8 door entry phones and 8 intelligent 2-wire analogue cameras.
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technical Data:

    • 32 Bit 400MHz i.MX27 ARM-9 CPU mit CMOS-Uhr & Lithiumbattery
    • 128MB SDRAM und 128MB Flash memory
    • 10/100Mbit Ethernet interface
    • 1x 56kB serial communication with bus multiplexor
          to 4x RS485 IBB lines each with electronic fuses
          0,5A 24VDC and line power monitoring
    • 1x supervised alarm input
    • 1x tamper switch,
    • Power supply: 110-250VAC  60 VA
          DC Output: 24V DC  2,5A max
          Battery charging and managing logic
          AC and Battery Power monitoring
    • Dimensions (overall): 307 x 175 x 80mm
    • Temperature range: -10° to +45°C
  • DIGIcontrol-FC3800

    FC3800
    Brochure:

    High security & building automation controller for up to 120 bus devices,50 security and regulation areas with 78h battery backup management.

    • Alarm central function for up to 50 out of 2000 total system wide arming areas
    • Integrated alarm control and diagnostic panel;
    • Access control for up to 15.000 cards and 50 doors;
    • 50 Regulation circuits for temperature control
    • light control for up to 200 light circuits, outside light level depending dimming and colour temperature control
    • 50 light programs
    • Management for up to 8 door entry phones and 8 intelligent 2-wire analogue cameras.
    • DIN EN54-4 approved powersupply with Battery quality control and management for 2x70Ah batteries;
    • Single PC graphical control software including graphic editor for displaying state and operating off all different security and building automation functions.

    Technische Daten:

    • 32 Bit 180MHz ARM-9 CPU mit CMOS-Clock & Lithiumbattery,
    • 32MB SDRAM, 16MB Flash memory
    • 10/100Mbit Ethernet interface
    • 1x 56kB serial communication with bus multiplexor
          to 8x RS485 IBB lines (configurable also as 4 IBB-Loops)
          each with electronic fuses 0,5A 24VDC and line power monitoring
    • 1x RS232 for diagnostic
    • 8x supervised inputs with 4x 12V/220mA switched power
    • 1x tamper switch
    • 4x Relay out max 30V/2A
    • 4x 12V/14VDC 22mA output
    • 3x monitored control lines 12V/440mA
    • 6x OC output 24V/120mA max
    • 1x monitored battery siren control
    • 2x monitored siren & flash light control
    • 1x dialler interface with feedback control
    • 1x interface for GSM/Modem & audio matrix Option
    • EN-54-4 Power supply: 110-250VAC  180 VA
         DC Output: 24V DC  7,5A max
         Battery charging and managing logic
         AC and Battery Power monitoring
         Battery quality monitoring  
    • Dimensions (overall): 19” 5HE Rack mount box  L=500mm
    • Temperature range: -10° to +45°C

     

  • DIGIterm-350

    DIGIterm-350 Multifunction
    Brochure:

    New implemented user functions extend the functionality of  the DIGIterm-350. Besides the T&A function, following smart building functions are available for download now: Light control functions to set & display light circuits on, off, dimming level, colour or colour temperature, control light groups and activate light programs; Alarmfunctions to display all active sensors before arming, alarm display of intrusion or fire alarms, quit and disarm; Regulation functions to display and control  room temperature, humidity and energy consumption;  Access control functions to stear doors and gates; Sound management to control sound level and play selected sound files…

    Technical data:

    • Multi-application terminal with DESfire & LEGIC Advant RFID reader
    • 5“ Touch Display with 10/100MBit POE Ethernet Interface
    • High security with 128 Bit AES encryption
    • 20 user configurable pages with up to 14 loadable icons
    • Single IBB Floorcontroller for up to19 remote devices
    • SD-card for long time offline recording